Learn to Apply Roof Coatings Visually Banner

PERMAKOTE PLUS

(BUR) Tar and Gravel Roof Application Procedure and Video

This Application Procedure and Video is intended to Aid in the Application and Is Not Sufficient for Warranty Conformance, Inquire for a Detailed Application Procedure and a Warranty Registration & Conformance Certificate before Application of Any Coatings.

GETTING STARTED
All coatings must be stirred manually or mechanically before being used (except for PERMAPATCH™). Do not let products freeze. Do not use any of these products at temperatures below 45 degrees Fahrenheit. Apply all products to dry surfaces only and do not apply products when they will be subjected to rain, high humidity or heavy dew before they have had enough time to dry (check Product Data Sheets). Do not thin any products unless specifically mentioned in this Application Procedure or Product Data Sheets.

VISUAL INSPECTION and REPLACEMENT of DAMAGED BUILDING MATERIALS - The substrate to be coated must be in SOUND condition. Physically inspect the surface area for missing or damaged building materials. Replace and/or repair all damaged areas back to sound and solid condition. This Application is not for metal roofs and will not seal rust, any rust must be treated before coating is applied, inquire about METAL-PRIME Rust Treatment Process. Inspect for any existing leaks and be sure to repair leaks prior to the application of coating. Use PERMAKOTE on Roofing surfaces having a Slope Greater than 1 inch per 24 inches or greater than a 4 degree angle, and not pond or hold any standing water at all. Only PERMAKOTE PLUS can be used on Flat and Level Roofing Surfaces, but can not hold or have any more than 1/2" of Standing Water in Any Area of Entire Roofing Surface (Please inquire for limitations). Roof must completely drain; proper drainage is essential before any coating is applied. Make sure roof is adequately vented, or condensation leaking can occur. This coating is not intended to stop and/or repair any past, present or future leaks and is not guaranteed to do so. Leaks, Labor and Quality of Workmanship are not warranted and will be the sole responsibility and liability of the applicator/contractor. Check with a licensed roofing contractor if necessary.

VIDEO INSTRUCTIONS:

Be Patient; Once you see the Picture in the Video Window it will be Active. Videos will start when you put your mouse pointer directly over the Video Picture (Videos take approx. 5 to 10 minutes to load at 28K/bps).

PERMAKOTE PLUS VIDEO #1 of 4

PRIME COAT
Apply PRIMER (PERMABOND™) using 1- brush, 2- at least a one inch nap roller, or 3- at least a 1 gallon per minute, 3,000 P.S.I. piston type airless sprayer with a minimum tip size of .025 tip. Remove tip and gun filters before starting.

mvplt-01.mpg

Video Navigation Arrows

Home Page ButtonWhat's New ButtonProduct List ButtonRequest Information ButtonOrders and Pricing ButtonForms List ButtonFrequently Asked Questions Button

NATIONWIDE's CONTACT INFORMATION:                    Business Hours: (M-F 8am-5pm EST)

Telephone: 941.753.7500     U.S. Toll Free: 1.800.423.7264      Fax: 941.753.1773 (24 Hour Dedicated Fax)

Manufacturing Excellence Since 1964

NATIONWIDE PROTECTIVE COATING MFRS., INC.

ENERGY STAR Partner

7106 24th Court East

Sarasota, Florida  34243 U.S.A.

E-mail: info@natcoat.net                 Directory of Sales Associates                  Web: webmaster@natcoat.net

Click for the BBB Business Review of this Manufacturers & Producers in Sarasota FL

EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.

LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, its occupants, its contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty.

LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: Any implied warranty, including warranty of fitness for a particular use or purpose, and warranty of merchantability, is limited in duration to the express warranty based on the Individual Product's Warranty, unless a shorter period is permitted by law. If no Warranty is stated for a specific product then the maximum warranty will be One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was not applied for using a Warranty Registration Certificate, the maximum warranty will be One Year from Date of Purchase. NPCMI shall not be liable for incidental or consequential damages or for damage to the building, its contents, or its occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty or any other theory or cause of action. Venue in reference to any Product of Nationwide shall be Manatee County, Florida, U.S.A.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.

Copyright 1998-2016 NATIONWIDE PROTECTIVE COATING MFRS., INC.

Last modified: June 28, 2016 01:02 PM